Fuel cell electrolyte for more efficient energy

Posted By : Enaie Azambuja
Fuel cell electrolyte for more efficient energy

A new thin-film electrolyte material that helps solid oxide fuel cells operate more efficiently and cheaply than those composed of conventional materials, and has potential applications for portable power sources, has been developed at the University of Cambridge. These new materials offer the possibility of either significantly improving the efficiency of current high-temperature fuel cell systems, or achieving the same performance levels at much lower temperatures.

Either of these approaches could enable much lower fuel consumption and waste energy. The material was co-invented by Professor Judith Driscoll of the Department of Materials Science and Metallurgy and her colleague Dr Shinbuhm Lee, with support from collaborators at Imperial College and at three different labs in the US.

Solid oxide fuel cells are comprised of a negative electrode (cathode) and positive electrode (anode), with an electrolyte material sandwiched between them. The electrolyte transports oxygen ions from the cathode to the anode, generating an electric charge. Compared to conventional batteries, fuel cells have the potential to run indefinitely, if supplied by a source of fuel such as hydrogen or a hydrocarbon, and a source of oxygen.

By using thin-film electrolyte layers, micro solid oxide fuel cells offer a concentrated energy source, with potential applications in portable power sources for electronic consumer or medical devices, or those that need uninterruptable power supplies such as those used by the military or in recreational vehicles.

“With low power requirements and low levels of polluting emissions, these fuel cells offer an environmentally attractive solution for many power source applications,” said Dr Charlanne Ward of Cambridge Enterprise, the University’s commercialisation arm, which is managing the patent that was filed in the US. “This opportunity has the potential to revolutionise the power supply problem of portable electronics, by improving both the energy available from the power source and safety, compared with today’s battery solutions.”

In addition to providing significantly improved conductivity, the new electrolyte material offers minimal heat loss and short circuiting due to low electronic conductivity; minimal cracking under heat cycling stress due to small feature size in the construction; high density, reducing the risk of fuel leaks; and simple fabrication using standard epitaxial growth and self-assembly techniques.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

POWER & ENERGY 2017
22nd November 2017
Rwanda Kigali